![]() |
Compotech supplies JACO nut + sleeve (integral or double) fittings suitable for thermoplastic flexible or rigid tubing. Each fitting is supplied with nut already mounted and ready to use. Our range includes: - Nylon fittings (for organic solvents, oil, benzene) - Polypropylene fittings (for acids and weak bases) - PVDF fittings (for strong acids, aggressive fluids and Ozone) |
Double Ferrule Nut (disassembled) | Nut integral sleeve (single sleeve) |
![]() |
![]() ![]() |
Sizes: PVDF, PP & Nylon JACO fittings: performances - Fast and easy assembly: nut tightened by hand. - Inside full bore section (no insert inside the tubing). - Gripper nut to avoid pull-out also for Teflon tubing. - Suitable also with rigid tube (Copper / Aluminum). - Minimum fluid drop pressure, thanks to large effective fluid cross sections. - Good resistance to mechanical vibrations, due to material elasticity. - Same material for all wetted parts , to get the best chemical resistance: no seals nor O-rings in other materials. |
Cod RO2*…. |
Tube diameter (outer) Inch size |
NPT thread |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
NPT thread |
A |
|
||||
Male connector Cod RO2*68…. *=P Poliprop |
02P02 04P02 04P04 04P06 05P02 05P04 06P02 06P04 06P06 06P08 08P02 08P04 08P06 08P08 10P06 10P08 12P08 12P12 14P12 |
1/8 1/ 4 1/ 4 1/ 4 5/16 5/16 3/8 3/8 3/8 3/8 1/ 2 1/ 2 1/ 2 1/ 2 5/8 5/8 3/4 3/4 7/8 |
1/8 1/ 8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/2 3/8 1/2 1/2 3/4 3/4 |
02P02 06M02 06M04 06M06 05P02 05P04 06P02 06P04 06P06 06P08 12M02 12M04 12M06 12M08 10P06 10P08 12P08 12P12 14P12 |
3mm 6mm 6mm 6mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 16mm 16mm 19mm 19mm 22mm |
1/8 1/ 8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/2 3/8 1/2 1/2 3/4 3/4 |
31 37 42 43 38 45 41 45 48 52 47 51 52 56 53 59 63 66 ** |
11 16 16 21 18 18 21 21 21 24 24 24 24 24 28 28 34 34 ** |
![]() |
|||
Female Connector Cod RO2*66…. |
04P02 04P04 05P04 06P04 06P06 06P08 08P06 08P08 10P08 |
1/4 |
1/8 1/4 1/4 1/4 3/8 1/2 3/8 1/2 1/2 |
06M02 06M04 05P04 06P04 06P06 06P08 12M06 12M08 10P08 |
6mm 6mm 8mm 10mm 10mm 10mm 12mm 12mm 16mm |
1/8
|
35 39 44 43 43 44 49 50 54 |
28 21 20 20 24 28 24 28 28 |
![]() |
|||
Cod RO2*…. |
Tube diameter (outer) Inch size |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
A |
|
||||||
Bulkhead
Cod RO2*82…. *=P Poliprop |
04P04P 05P05P 06P06P 08P08P 12P12P |
1/4x1/4 5/16x5/16 3/8x3/8 1/2x1/2 3/4x3/4 |
--- --- --- --- --- |
06M06M 05P05P 06P06P 12M12M 12P12P |
6mmx6mm 8mmx8mm 10mmx10mm 12mmx12mm 19mmx19mm |
|
60 66 68 75 94 |
16 18 23 27 33
|
![]() |
|||
Union straight Cod RO2*62…. *=P Poliprop |
04P04P 04P02P 05P05P 06P04P 06P06P 08P06P 08P08P 10P10P 10P06P 10P08P 12P12P 14P14P 14P10P |
1/4x1/4 1/4x1/8 5/16x5/16 3/8x1/4 3/8x3/8 1/2x3/8 1/2x1/2 5/8x5/8 5/8x3/8 5/8x1/2 3/4x3/4 7/8x7/8 7/8x5/8 |
--- --- --- --- --- --- --- --- --- --- --- --- --- |
06M06M 06M02P 05P05P 06P06M 06P06P 12M06P 12M12M 10P10P 10P06P 10P12M 12P12P 14P14P 14P10P |
6mmx6mm 6mmx3mm 8mmx8mm 10mmx6mm 10mmx10mm 12mmx10mm 12mmx12mm 16mmx16mm 16mmx10mm 16mmx12mm 19mmx19mm 22mmx22mm 22mmx16mm |
|
50 44 53 54 53 62 67 69 ** ** 82 85 ** |
16 16 18 21 21 25 24 28 ** ** 34 37 ** |
![]() |
|||
Cod RO2*…. |
Tube diameter (outer) Inch size |
NPT thread |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
NPT thread |
A | B | ||||
Male elbow Cod RO2*69…. *=P Poliprop
|
02P02 |
1/8 |
1/8 |
02P02 |
3mm |
1/8 |
23 |
16 |
![]() |
|||
Female elbow
Cod RO2*70…. *=P Poliprop |
02P04 04P02 04P04 05P04 06P04 06P06 08P06 08P08 10P08 |
1/8 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 |
1/4 1/8 1/4 1/4 1/4 3/8 3/8 1/2 1/2 |
02P04 06M02 06M04 05P04 06P04 06P06 12M06 12M08 10P08 |
3mm 6mm 6mm 8mm 10mm 10mm 12mm 12mm 16mm |
1/4 1/8 1/4 1/4 1/4 3/8 3/8 1/2 1/2 |
28 33 33 35 40 35 42 41 ** |
26 21 26 26 26 26 34 34 ** |
![]() |
|||
A | ||||||||||||
Union elbow
Cod RO2*65…. *=P Poliprop |
04P04P 05P05P 06P06P 08P08P 10P10P 12P12P 14P14P 14P10P |
1/4x1/4 5/16x5/16 3/8x3/8 1/2x1/2 5/8x5/8 3/4x3/4 7/8x7/8 7/8x5/8 |
--- --- --- --- --- --- --- --- |
06M06M
|
6mmx6mm
|
---
|
31 36 35 42 47 ** ** ** |
|
![]() |
|||
Cod RO2*…. |
Tube diameter (outer) Inch size |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
A | B | ||||||
Union tee
Cod RO2*64…. |
02P02 04P04 05P05 06P06 08P08 10P10 12P12 14P14 |
1/8x1/8x1/8 1/4x1/4x1/4 5/16x5/16x5 3/8x3/8x3/8 1/2x1/2x1/2 5/8x5/8x5/8 3/4x3/4x3/4 7/8x7/8x7/8 |
--- --- --- --- --- --- --- --- |
02P02 06M06M 05P05 06P06 12M12M 10P10 12P12 14P14 |
3x3x3(mm) 6x6x6(mm) 8x8x8(mm) 10x10x10(mm) 12x12x12(mm) 16x16x16(mm) 19x19x19(mm) 22x22x22(mm) |
45 62 67 72 85 98 110 ** |
23 30 32 35 43 47 55 ** |
![]() |
||||
Cod RO2*…. |
Tube diameter (outer) Inch size |
Filett. NPT |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
Filett. NPT |
A | B | ||||
Male branch tee Cod RO2*72…. *=P Poliprop *=K PVDF *=N Nylon |
04P02 |
1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 7/8 |
1/8 |
06M02 06M04 05P04 06P04 06P06 12M06 12M08 10P08 12P08 12P12 14P12P |
6mm |
1/8 |
62 62 65 72 71 83 84 95 ** ** ** |
20 24 25 28 28 31 34 37 ** ** ** |
![]() |
|||
Cod RO2*…. |
Tube diameter (outer) Inch size |
NPT thread |
** | Cod RO2*…. |
Tube diameter (outer) Metric size |
NPT thread |
A | B | ||||
Male run tee Cod RO2*71…. *=P Poliprop *=K PVDF *=N Nylon |
04P02 04P04 05P04 06P04 06P06 08P06 08P08 10P08 12P08 12P12 14P12P |
1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 7/8 |
1/8 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 |
06M02 06M04 05P04 06P04 06P06 12M06 12M08 10P08 12P08 12P12 14P12P |
6mm 6mm 8mm 10mm 10mm 12mm 12mm 16mm 19mm 19mm 22mm |
50 54 59 63 66 72 75 ** 112 ** ** |
31 29 33 35 35 43 43 ** 41 ** ** |
![]() |
||||
Tube diameter (outer) Inch size |
Tube diameter (outer) Metric size |
A | B | |||||||||
|
17mm 19mm 19mm 22mm 22mm 25mm 29mm |
17mm 19mm 19mm 22mm 22mm 25mm 29mm |
16mm 18mm 21mm 23mm 29mm 33mm 37mm |
17mm 19mm 19mm 22mm 22mm 25mm 29mm |
||||||||
JACO fittings for soft tubings(Silicone ,PVC, Tygon) |
||||||||||||
Pvdf fitting insert, suitable for with 6x4 mm silicone tubing. Thank to the insert, it is possible to use still PVDF JACO fitting and avoid the tubing collapse under nut tightening. |
||||||||||||
Assembling Instructions | ||||||||||||
- Cut the tubing squarely, using the hand tool |
||||||||||||
|
||||||||||||
Note: Should inadvertently the sleeves pull out of the Nut, reinsert them as follows:
|