Polyethylene Tubing (for general purpose or weak acids)
|
 |
|
|
Description: Low Dens. Polyeth. Tubing for general use or low aggressive fluids. Operating temperatures ranging from –10 C° to +60 C°. (See herebelow derating Temp. Table) Supplied in 100 mts coils up to 16mm OD, or 50 mts coils for higher Diameters. Colours: natural; Black. Upon request: red; yellow; green; blue |
||
|
Operating Pressure- Diameters Table Pressure derating factor versus temperature: 20° (100%) / 30°(83%) / 40°(72%) / 50°(64%) / 60°(57%) Other diameters (higher or smaller) available upon request |
||
|
Metric sizes |
Inch sizes |
|||||
|
Diam. (mm) |
Oper.Press. 20 C°(bar) |
Bending Rad.(mm) |
Nominal |
Diam. (mm) |
Oper.Press. 20 C°(bar) |
Bending Rad.(mm) |
|
6 x 4 |
13 |
30 |
¼ |
6,35 x 4,35 |
12 |
30 |
|
8 x 6 |
9 |
40 |
|
|
|
|
|
10 x 8 |
7 |
60 |
3/8 |
9,5 x 6,35 |
13 |
50 |
|
12 x 10 |
6 |
80 |
½ |
12,7 x 9,5 |
9 |
65 |
|
16 x 12 |
9 |
100 |
5/8 |
16 x 12 |
9 |
100 |
PVDF Tubing / KYNAR® (for aggressive chemicals)
|
|
|
|
Description: Tubing KYNAR PVDF (Polyvinylidene fluoride) is strongly suitable with acid fluids ( Hydrocloric Acid or Sulphuric acid). It is a valid and cheaper alternative to Teflon PTFE. Good aging resistance Good impermeability with gases. Operating temperatures ranging from –20 C° to +80 C°. (See herebelow derating Temp. Table) Supplied in 100 mts coils up to 12mm OD, or 50 mts coils for higher Diameters. Colours: natural; Black. |
||
|
Operating Pressure- Diameters Table Pressure derating factor versus temperature: 20° (100%) / 40°(75%) / 60°(60%) / 80° (50%) Other diameters (higher or smaller) available upon request |
||
|
Metric Sizes |
Inch Sizes |
|||||
|
Diam. (mm) |
Oper.Press 20 C°(bar) |
Bending Rad.(mm) |
Nominal |
Diam. (mm) |
Oper.Press. 20 C°(bar) |
Bending Rad.(mm) |
|
6 x 4 |
33 |
35 |
¼ |
6,35 x 3,17 |
55 |
40 |
|
8 x 6 |
24 |
40 |
|
|
|
|
|
10 x 8 |
19 |
60 |
3/8 |
9,5 x 6,35 |
33 |
80 |
|
12 x 10 |
15 |
85 |
½ |
12,7 x 9,5 |
24 |
95 |
|
16 x 13 |
17 |
86 |
5/8 |
16 x 13 |
17 |
100 |
|
22 x 18 |
17 |
200 |
7/8 |
22 x 18 |
17 |
200 |
PTFE / PFA Tubing (Teflon) (for very aggressive fluids)
|
Suitable with double sleeve JACO fittings
|
 |
Description: Teflon PTFE (politetrafluoroeth.) is the most popular fluorine Polymer.
Has excellent resistance to acids and bases, even at higher temperatures.
Can work also at low Temp. up to -40 C°. . Inert to Oxygen, Ozone and UV Rays.
An antistatic version is specifically suitable in Textyle Industry or Painting (with powder).
Teflon FEP o PFA has great impermeability to most of gases and is transparent like glass.
Particularly suggested to get retractile coils even at high temperatures.
 |
 |
 |
Operating Pressure- Diameters Table
Pressure derating factor versus temp: 20°(100%) / 50°(85%) / 100°(65%) /150° (50%)
|
Metric Sizes (PTFE) |
Inch Sizes (PTFE) |
|||||||
|
Diam. (mm) |
Burst Press. Bar 25° |
Working Press. Bar 25° |
Bending Rad. mm |
Nominal |
Diam. (mm) |
Burst Press. Bar 25 |
Working Press. Bar 25° |
Bending Rad. mm |
|
6 x 4 |
40 |
13 |
36 |
1/8 |
3,20 x 1,5 |
100 |
30 |
12 |
|
8 x 6 |
30 |
10 |
64 |
1/4 |
6,35 x 4,35 |
60 |
20 |
40 |
|
1/4 |
6,35 x 3,18 |
90 |
30 |
30 |
||||
|
10 x 8 |
24 |
8 |
100 |
3/8 |
9,5 x 6,35 |
60 |
20 |
60 |
|
12 x 10 |
20 |
7 |
144 |
1/2 |
12,7 x 9,5 |
40 |
13 |
100 |
|
16 x 14 |
15 |
5 |
256 |
5/8 |
Vedi 16 x 14 mm |
|
||
|
19 x 16 |
25 |
8 |
240 |
3/4 |
3/4 x 5/8 |
Vedi 19 x 16mm |
||
|
22 x 19 |
15 |
5 |
323 |
7/8 |
22 x 19 |
Vedi 22 x 19mm |
||